Lamello nozzles for flat

As Lamello has decided to discontinue production of cold glue equipment for adhesives, we are selling our remaining stock of accessories for their pressure feed containers, note only available while stocks last.

Get all the information about this product in product brochures.

Lamello brochure
LT pressure feeding equipment for the wood industry - Compatible with Lamello
See all our variants of Lamello nozzles for flat here.

Contact us here if you request a specific product.

Nozzles for flat surfaces
Product no.Description
512605Brush 50x35mm
512602Flat roller w/reservoir width 180mm
512610Replacement rubber roller width 180mm
552611Sponge rubber roller width 180mm
512607Flat nozzle slightly corrugated width 80mm
512612Flat nozzle slightly corrugated width 120mm
512618Flat nozzle slightly corrugated width 180mm
512670Flat nozzle PUR, width 120mm, 14-hole Ø 2.0mm
512679Flat nozzle PUR; width 100mm, 6 glue holes Ø 3.5×1.5mm
512380Flat nozzle PUR, width 120 mm, 8 glue holes Ø 3,5×1,5mm
512681Flat nozzle PUR, width 140mm, 8 glue holes Ø 3.5×1.5mm
512685Flat nozzle PUR; width 220mm, 12 glue holes Ø 3.5×1.5mm

Our values

PROFESSIONALITY, SERVICE & EXPERIENCE

PROFESSIONAL SOLUTIONS

Our wide product range and detailed service level ensures you optimal operation.

24 HOUR ACCIDENT SERVICE

Our local warehouse and service usually allows emergency service within 24 hours to your facilities if the accident occurs.

MORE THAN 30 YEARS OF EXPERIENCE

We have found effective adhesive solutions for our clients since 1990. Should we also find yours?

Our values

PROFESSIONALITY, SERVICE & EXPERIENCE

PROFESSIONAL SOLUTIONS

Our wide product range and detailed service level ensures you optimal operation.

24 HOUR ACCIDENT SERVICE

Our local warehouse and service usually allows emergency service within 24 hours to your facilities if the accident occurs.

MORE THAN 30 YEARS OF EXPERIENCE

We have found effective adhesive solutions for our clients since 1990. Should we also find yours?

NICHOLAS LARSEN

Service technician

Klaus swimming spar

Service technician

DO YOU NEED GUIDANCE?

Our range is very comprehensive and it can be difficult to find the best solution. Contact us and get professional guidance through one of our consultants.

Fill out the contact form

CARSTEN LARSEN

Founder & owner

JOSEFINE LARSEN

Office & logistics

SIMON LARSEN

Internal sales & order processing

Products related to Lamello nozzles for flat

Trykfødebeholder Limtech

Pressure feed tank for the wood and paper industry

Pressure feed tank for the wood and paper industry
Go to the product

Piston pump

The glue supply unit with piston pump is designed for use with low viscosity glue. The piston pump has a 1:4 ratio (1 bar air pressure on the pump gives 4 bar glue pressure).
Go to the product

Microprocessor controllers

Microprocessor controllers are designed and recognized for their use in glue control on a wide variety of fast-moving production machines.
Go to the product

Contact us

GET PROFESSIONAL GUIDANCE

Hot melt units

Modules

SERVICE

Guns

Adhesives

TECHNIQUE

Nozzles

Adhesives

Hot melt

Hoses

Cold glue equipment

Experience

Accessories

Equipment